Pv-Gs35; Recording With The Built-In Led Video Light (For Pv-Gs31/Pv-Gs34/Pv-Gs35); Quick Start; Self-Timer Recording - Panasonic PV-GS19 Operating Instructions Manual

Recording with the Built-in LED
Video Light (For PV-GS31/PV-GS34/

PV-GS35)

To brighten the natural colours in a scene. Gain Up
mode works with the Built-in Video Light to enhance
the light's brightness.
• Set to Tape/Card Recording Mode.
1
Press the [LIGHT] Button
33
• The Built-in LED Video Light lights and the Gain
Up mode is set to on.
• Gain Up mode will be brighter than when only
the Video Light is on, however, ghost images
will appear.
2
Press the [LIGHT] Button.
• Gain Up mode is set to off.
• To eliminate ghost images, use this mode.
3
Press the [LIGHT] Button.
• The Video Light turns off.
• Pressing the [LIGHT] Button again returns to
1 2
• For other notes concerning this item, see page 66.

Quick Start

This Camcorder will be put into standby in approx.
1.3 seconds (PV-GS19) / 1.7 seconds (PV-GS31/
PV-GS34/PV-GS35) after the power is turned on.
• This is only activated in the following cases:
- A tape or a card is inserted, while the Tape
Recording Mode is set.
- A card is inserted, while the Card Recording Mode
is set.
• Set to Tape/Card Recording Mode.
1
Press the [QUICK START] Button
• The Quick Start Recording Lamp
(Press the button again to cancel it.)
29
Recording Mode
2
3
33 . 1
To Cancel the Quick Start when the
Power is OFF
Keep the [QUICK START] Button pressed for
approximately 2 seconds and make sure the Quick
Start Recording Lamp is not lit.
• For other notes concerning this item, see page 66.

Self-timer Recording

2
When you set the self-timer, the recording starts
automatically after 10 seconds on the Card.
• Set to Card Recording Mode.
3
1
1 .
3
2
• If the RapidFire Consecutive Photoshot is set, the
maximum recordable pictures (max. 10 pictures) are
recorded. (p. 28)
.
29
To Stop the Self-timer in Progress
lights up.
29
Press the [MENU] Button
• For other notes concerning this item, see page 66.
Set the [OFF/ON] Switch
• The Quick Start Recording Lamp remains lit.
28
Set the [OFF/ON] Switch
• The Camcorder will be ready for recording
in approximately 1.3 seconds (PV-GS19) /
1.7 seconds (PV-GS31/PV-GS34/PV-GS35).
Set [ BASIC] >> [ SELF TIMER] >> [YES].
35
30
• The [ ] Indication appears.
Press the [PHOTO SHOT] Button
• The [ ] Indication flashes and the recording
starts after 10 seconds. After recording, the
Self-Timer will be cancelled.
.
30
to [OFF].
28
to [ON].
28
25 .
29