UTICA BOILERS SFH-3085 Installation, Operation & Maintenance Manual page 26

Figure #26
Instructions For Closing Burner Swing Door
1. Swing burner and door to right until insulation is
slightly compressed and stud is exposed.
2. Attach nut to stud and tighten until built in stop
contacts the mounting door.
3. Replace oil line to burner.
4.
Replace lower jacket panel, and tighten screws.
5.
Connect power cable at factory supplied burner
electrical disconnect.
6.
Turn on power to boiler.
7. Bleed oil line.
OPERATING INSTRUCTIONS
SAFETY RELIEF VALVE
26