Pairing Bluetooth; Bluetooth Options; Ending Bluetooth Connecting - Teufel concept c Instruction Manual

Pairing Bluetooth

With Bluetooth, you can wirelessly connect a
compatible source device (e.g., a smartphone) to the
Concept C. The sound output of the source device
occurs then via the Concept C.
In order to establish a connection, both devices must
be paired. The distance between the Concept C and
the source device should not be more than 1 m. After
the pairing, and without obstacles, the range is about
10 m.
1. Repeatedly press the side button (3), until the blue
LED 2 (11) lights up.
The input "Bluetooth" is now selected.
2. Activate Bluetooth on your source device (e.g.,
smartphone, iPad® etc.).
3. Press the button BT PAIRING (4) and let your
source device scan for other Bluetooth devices.
You can fi nd more information about this in the
instruction manual of your smartphone or tablet.
4. After the scan, "Concept C" should appear in the
list of the detected devices.
Select this item from the list of found devices.
Your Concept C now works as a Bluetooth playback
device. All sounds that would otherwise be played
from your source device will now be played by the
Concept C.
You only need to perform the pairing process once.
The Concept C will remain in the list of paired
devices and can be selected at any time.
With some smartphones and tablets, you need
to make sure that playback will occur through
the Bluetooth device and not on the source device
itself. This can be selected through the playback
menu.
The volume and sound settings of the source device
also affect the volume of the Concept C.

Bluetooth options

Depending on the type of source device you have,
there may be further Bluetooth options, such as
media playback and call function which you can turn
off and on according to your wishes.
The call function is not supported by Concept C2013
SW.
For more information about the Bluetooth options,
refer to the instruction manual of your source device.

Ending Bluetooth connecting

Turn off the Bluetooth function on your source device
or decouple the Concept C.
3
4
11
• Concept C 13