Sony VPH-G90U Service Manual page 167

<When NO-INPUT>
At all timings for writing and storing data in the unit (save), data of the input memory for the input signals in the area
for changing various data (RAM) is collectively written and stored in the original input memory from which the data is
read from (load) of the user area.
<INPUT-Memory No. in which the data is written and stored :>
When the input memory load/save is Auto :
Until the number of registrations of the custom input memory becomes max. (150 — 13), assigned automatically to
unused memories starting from the smallest memory number in order.
When the number of registrations of the custom input memory is max, new input memories are created by overwriting
from No. 13.
Data cannot be written when the input memory written in is protected ;
In this case, take note that adjustments will be possible.
At the same time, when the memory key is pressed, an OSD message indicating that data cannot be written will be
displayed.
If all input memories are protected, since there is no memory to save the data, an error message will be displayed when
determined as new data.
When the protect of several input memories is canceled, the data to be newly registered will be written in the memory
with the smallest number.
When input memory load and save is manual :
The memory of the input memory No. specified will be the input memory for the new input signal.
Data cannot be saved when the input memory saved in is protected ;
In this case, take note that adjustments will be possible.
At the same time, when the memory key is pressed, an OSD message indicating that data cannot be saved will be
displayed.
If all input memories are protected, since there is no memory to save the data, an error message will be displayed when
determined as new data.
VPH-G90E/G90U/G90M 2-47