Error Code - Sony VPH-G90U Service Manual

2-3. ERROR CODE

2-3-1. Warning Code on 7-Segment LED
Error no. LED color Note
01 Green Main CS incorrect
03 Green Font CS incorrect
10 Green Upload mode Start
11 Green Upload data from Comm
12 Green Updata data to FM
18 Green Transport Error1
19 Green Transport Error2
1A Green Transport Error3
1B Green Transport Error4
1C Green Transport Error5
1D Green Transport Error6
1E Green Transport Error7
1F Green Transport Error8
20 Green Transport Error9
21 Green Transport Error10
24 Green Session Error
2F Green Return to Normal
30 Green User NVM format not available !
31 Green User NVM formatting...
32 Green User NVM writing...
33 Green Service NVM format not available !
34 Green Service NVM formatting...
35 Green Service NVM writing...
36 Green Factory NVM format not available !
37 Green Factory NVM formatting...
38 Green Factory NVM writing...
3A Green Input memory changing...
3B Green Now Power on delay waiting...
40 Green Configuring the system
41 Green Same DEVICE INDEX for
Projector detected
42 Green Same DEVICE INDEX for
Switcher detected
43 Green Master Switcher not exist
When any of these codes is output in the ON condition, the device cannot be in the Standby state.
VPH-G90E/G90U/G90M
Description
Check Sum of Main Program is incorrect.
Main Program is not written correctly on Flash Memory.
Upload Mode starts immediately after this error is displayed.
Check Sum of Font Data is incorrect.
Upload Mode starts immediately after this error is displayed.
Displayed when Upload mode starts. (Flash twice.)
Mode of uploading data from communication.
Mode of writing data uploaded from communication on Flash Memory.
Transport Error (Upload Mode)
Transport Error: Start Code Low Byte Error (Upload Mode)
Transport Error: Packet Length Error (Upload Mode)
Transport Error: Data Length Error (Upload Mode)
Transport Error: Header Check Sum Error (Upload Mode)
Transport Error: Data Check Sum Error (Upload Mode)
Transport Error: Data End Low Byte Error (Upload Mode)
Transport Error: Data End High Byte Error (Upload Mode)
Transport Error: Invalid Error (Upload Mode)
Transport Error: Retry Occur (Upload Mode)
Session Error (Upload Mode)
Upload Mode is finished. Return to Normal Mode.
User Domain NVM is not formatted.
User Domain NVM is being formatted.
Data is being written on User Domain NVM.
Service Domain NVM is not formatted.
Service Domain NVM is being formatted.
Data is being written on Service Domain NVM.
Factory Domain NVM is not formatted.
Factory Domain NVM is being formatted.
Data is being written on Factory Domain NVM.
Displayed when Input signals are considered unstable.
Waiting for ON in the "ON DELAY" mode.
System Setting is being performed.
There are other projectors that have the same device index number.
There are other switchers that have the same device index number.
There is no Master Switcher.
2-25