Sony VPH-G90U Service Manual page 166

2 Data Writing and Storage (Save)
The writing and storing timing of the data and memory in which the data is written in differ between the new input
signal and existing input signal.
<For new input signals>
By pressing the MEMORY Key, the INPUT-MEMORY data "in the area (RAM) changing various data" at that point is
written and stored (save) in the new memory set as the custom input memory.
At the same time, the same data is also written and stored in the original input memory from which the data is read from
(load).
Timing
When the MEMORY key is pressed
<For existing input signals>
At all timings for writing and storing data in the unit (save), data of the input memory for the input signals in the area
for changing various data (RAM) is collectively written and stored in the custom input memory from which the data is
read from (load) of the user area.
Timing
When the MEMORY key is pressed
When the input channel is changed
(When input instability is confirmed)
When the input signal is changed
(When input instability is confirmed)
When the mode of the unit is changed
When the POWER is turned OFF
2-46
Memory Type
All data in the input memory
Table 19. Writing and Storing of Data in Input Memory <New> (Save)
Memory Type
All data of the input memory
Table 20. Writing and Storing of Data in Input Memory <Exist> (Save)
Memory Area (to)
New custom input memory of the user area and
input memory from which the data is loaded from
(original).
Memory Area (to)
Custom input memory read from of the user area
(load) and original input memory read (loaded)
when this memory is newly created.
VPH-G90E/G90U/G90M