Safety Information; Packing Information - Microh RIO IP PAR126 User Manual

1.

Safety information

After receiving the device, please unpacking check whether any visible damage was caused during
transport. lf the power cord housing or the light are damaged, do not operate the device, contact your
specialized dealer or manufacturer immediately.
1),Please read the user manual before energizing or installation.
2),Follow operating safety precautions and pay attention to warning signs methods and
Equipment on the user manual.
Prevent fall to injury
1),When hanging lamps, must verify the lamp hook and facilities at least able to
withstand the weight of the lamp 10 times.
2),Before installation must be verify the install hardware strong enough no other
damage, and the use of safe insurance rope as auxiliary safe way, fixed on the other
facilities.
3),Installing or removing equipment, must be lower the boom to a safe place.
Prevent combustion or fire
1),Please do not install the device directly on the surface of ordinary combustible
material.
2),Don't short sub temperature control protection switch or fuse, must use the
regulation models of fuse.
3),Equipment must be installed away from flammable materials, equipment away from
flammable items or materials shortest distance is 0.5mm.
4),Fan or ventilation at least within the range of 0.3m cannot have obstacles.
5),Allow equipment to cool at least 15 minutes before handling.

2. Packing information

Item Name
The LED par light
Signal wire
Power wire
User manual:
Safety warning information
QTY
1
1
1
1
Unit
pcs
pcs
pcs
pcs