Table of Contents
Advertisement
show security mac-learning
show security static-MAC
show snmp
show snmp rmon
show spantree
show syntax
show system
show trunk
show version
show vlan
show vlan type
3.5.2 Privileged Command
To access to the second level, enter the "enable" command in the first level. The sysem then prompt for
a password. Please enter "password" for the password.
The promt then changes to "Switch\enable>". Entering a question mark "?" at the prompt displays the
list of commands available for command mode.
3.5.2.1 Clear command
Clear command is to clear the parameter. The follow table lists the clear commands and the equivalent
usages.
Command
clear channel
clear mirror monitored-port egress
clear mirror monitored-port ingress
clear multicast router
clear port counters
clear port rate-shaping
clear port spantree portcost
clear port spantree portpri
clear port storm-limit
clear qos map cos-queue-map
clear qos map dot1p-cos-map
clear qos map mac-cos-map
clear qos map vlan-cos-map
clear security filter-MAC
Show port security status
Show static mac table information
Show snmp information
Show snmp rmon state
Show spanning tree information
Show basic help infomation
Show system information
Show trunk information
Get last software version
Show vlan information
Show current vlan type
Description
Clear member from channel
Clear egress monitored port for mirror
Clear ingress monitored port for mirror
Clear router port
Clear port statistics counter
Clear rate-shaping of all ports
Restore spanning tree port cost to default value
Restore spanning tree port priority to default value
Clear strom limit of all ports
Reset cos-queue map to default
Reset dot1p_cos map to default
Clear qos map mac-cos-map
Clear qos map vlan-cos-map
Clear MAC filter entry
Advertisement
Table of Contents
