2-3. BACK PANEL SECTION
1 Wire (flat type)
(13 core) or
(15 core)
2-4. MAIN BOARD
2 One connector
3 Wire (flat type) (17 core)
4 Wire (flat type) (19 core)
4 Remove the back panel
to direction of the arrow.
2 Connector
1 One connector
6 Remove the MAIN
board to direction
of the arrow.
5 Two screws
(BVTP 3 × 8)
3 Eighteen screws
(BVTP 3 × 8)
9