Sony HCD-ZX30AV Service Manual page 13

2-11. TRAY (SUB)
1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction.
2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the arrow B direction.
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.
Stocker section
Tray (sub)
2-12. CHASSIS (MOLD B) SECTION, STOCKER SECTION AND SLIDER (SELECTION)
Note: In mounting the parts, refer to page 14 and 15.
4 Two step
screws
Pully (LD)
6 Two screws
5 Stocker
section
Pully (LD)
4 Two step screws
Slider (selection)
A
B
(PTPWH M2.6)
7 Slider (selection)
8 Washer
9 Compression
spring
3 Gear (eject)
Pully (mode)
1 Three screws
(BVTP M2.6)
2 Chassis (mold B) section
Note: Rotating the pully (LD),
shift the slider (selection)
to the left.
13