Sony HCD-ZX30AV Service Manual page 14

2-13. GEARS INSTALLATION
3 Gear (gear B)
Adjust the gear (gear B) with the
portion A as shown.
1 Slide the slider (u/d)
fully in the arrow
direction.
2 Gear (U/D slider)
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D) gear,
as shown.
2-14. SLIDER (SELECTION) INSTALLATION
2 Gear (chuking)
Align with the slot of
rotary encoder.
1 Rotary encoder
Align marking
14
Portion A
Slider (U/D) gear
Rotary encoder
4 Gear (gear A)
Gear
(gear B)
6 Two screws
(PTPWH M2.6)
5 Washer
4 Compression spring
7 Insert the slider (selection)
into the portion A.
3 Convex portion of
Insert a convex portion into
a groove of gear (chuking).
Linearly
Adjust so as to be aligned with
gear B linearly, as shown.
Portion A
slider (selection)
Gear (chuking)