Connecting A Computer; Hdmi And Dvi Input - Haier HL37XLE2 Service Manual

Service Manual
Model No.: HL37XLE2

Connecting a computer

How to connect
A
To get the best picture quality, adjust the VGA
graphics card to 1024 768.
B
Use the corresponding cable to connect the TV's
VGA or DVI (Digital Visual Interface) to the PC's video
output, depending on your computer connector.
C
Then, make the corresponding audio connection
by connecting an audio cable from your PC's audio
out or headphone jack to the TV's PC/DVI audio in
jack. If using a sound card, adjust the VGA sound as
required.
PC PC/DVI AUDIO
PC IN
How to use
A
Turn on the computer and the TV.
B
Use INPUT on the remote control to select VGA or
HDMI source.
C
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in VGA mode. If noise
is present, change the VGA mode to another
resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGA
graphic card or consult the manufacturer of the VGA
graphic card.
22
Back of TV
Note
Use a DVI cable.
Avoid keeping a fixed image on the TV's screen
for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and
Vertical frequencies is separate.
Resolution
Resolution Frame frequency (Hz)
640 480
800 600
1024 768
1280 1024
1360 768
1920 1080

HDMI and DVI input

When the source device (DVD player , Bluray player,
or Set Top Box) supports HDMI.
This TV supports HDCP (High-bandwidth Digital
Contents Protection) protocol for Digital Contents
(480p,720p,1080i).
How To Connect
A
Connect the source device to the HDMI port of
this TV with an HDMI cable (not supplied with this
product).
B
No separated audio connection is necessary.
How To Use
• If the source device supports the Auto HDMI
function, the output resolution of the source
device will be automatically set to the appropriate
resolution.
• If the source device does not support the Auto
HDMI, you need to set the output resolution
60Hz
60Hz
75Hz
60Hz
75Hz
60Hz
75Hz
60Hz
60Hz