Kenmore 970c4262 series Use & Care Manual page 9

Slide-in induction range
Table of Contents

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
Important Instructions for Cleaning Your
Range
Before manually cleaning any
part of the range, be sure all controls are
turned OFF and the range is cool. Cleaning a
hot range can cause burns
• Clean the range regularly to keep all
parts free of grease that could catch fire.
Pay particular attention to the area
around each surface element. Do not
allow grease to accumulate.
• Always follow the manufacturer's recom-
mended directions for use of kitchen
cleaners and aerosols. Be aware that
excess residue from cleaners and aerosols
may ignite causing damage and injury.
• Clean ventilating hoods frequently.
Grease should not be allowed to accumu-
late on the hood or filter. Follow the
manufacturer's instructions for cleaning
hoods.
Self-Cleaning Ovens
• Use the self-clean cycle to clean only the
parts listed in this manual. Before using
self-clean, remove the broiler pan, any
food, utensils, and cookware from the
oven. Remove oven racks unless otherwise
instructed.
• Do not use oven cleaners. No commercial
oven cleaner, oven liner, or protective
coating of any kind should be used in or
around any part of the oven.
• Do not clean the oven door gasket. The
door gasket is essential for a good seal.
Do not rub, damage, or move the gasket.
• Some birds are extremely sensitive to the
fumes given off during the self-clean
cycle of any range. Move birds to another
well-ventilated room.
Read all instructions before using this appliance.
Save these instructions for future reference.
Grounding Instructions
For models factory-equipped with a power
cord:
Avoid fire hazard or electrical
shock. Failure to follow this warning may
cause serious injury, fire, or death.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be plugged into an
electrical outlet that is the correct voltage, is
correctly polarized and properly grounded in
accordance with local codes.
Power supply
cord with 4-prong
grounding plug
It is the personal responsibility of the
consumer to have the appropriate outlet with
the correct, properly grounded wall
receptacle installed by a qualified
electrician.
See the installation instructions packaged
with this appliance for complete installation
and grounding instructions.
9
240V grounded
wall receptacle

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents