Url Filter Screen - ZyXEL Communications WAH7706 User Manual

Table 27 Router > Firewall > IPv6/Port Filter
LABEL
Port
Protocol
Dest. IP
Port
Comment
Action
Apply
Reset

6.8 URL Filter Screen

Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Router > Firewall > URL Filter.
Figure 32 Router > Firewall > URL Filter
Chapter 6 Router
DESCRIPTION
This field displays a single port number of the source or the starting port number of a range.
Enter the port number/range of the source that define the traffic type, for example TCP port
80 defines web traffic.
This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets
for which you want to apply the rule.
This field displays the destination IP addresses to which this rule applies.
This field displays a single port number of the destination or the starting port number of a
range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Enter descriptions of the rule in this field.
Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Click this button to save your changes back to the WAH7706.
Click Reset to reload the previous configuration for this screen.
WAH7706 User's Guide
57