Resetting The Wah7706; How To Use The Physical Reset Button - ZyXEL Communications WAH7706 User Manual

Table 1 WAH7706 OLED Icons (continued)
ICONS

1.7 Resetting the WAH7706

If you forget your password or IP address, or you cannot access the Web Configurator, you will need
to use the physical Reset button to reload the factory-default configuration file. This means that
you will lose all configurations that you had previously saved, the password will be reset to 1234
and the IP address will be reset to 192.168.1.1.

1.7.1 How to Use the Physical Reset Button

Make sure the WAH7706 is turned on.
1
Remove the bottom cover and press the Reset button until the WAH7706 reboot and set the
2
WAH7706 back to its factory-default configurations.
Chapter 1 Introduction
DESCRIPTION
This shows the number of unread text messages in the SMS inbox.
The icon is grayed out if there is no messages.
The WAH7706 is sending and receiving data to/from the WAN.
WAH7706 User's Guide
11