Touch Pad (Advanced) - Panasonic CF-37 series Reference Manual

Touch Pad
Work Surface
Right Button
Left Button
(Advanced)
Use the touch pad to move the cursor on the display and perform normal computer operations.
NOTE
The touch pad has been designed to work only when a finger is used. Therefore, do
not use any implement on the touch pad.
Basic Operation
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll*
Scroll a document
(rotate the wheel)
Auto Scroll*
Automatically scroll a document
Touch Pad Operation
Move the tip of your finger
lightly over the surface.
or
tapping
or
double-tapping
or
Two quick taps, but on the
While holding down the
second tap leaving your
button, moving your fin-
finger down (applying
ger on the work surface.
pressure) and moving it
on the work surface.
When a check mark
Lock] *
After the drag operation (above : left side), it is
necessary to determine the destination (i.e.,
location of drop) by one tap. Under the condi-
tion no destination is selected, do not use the
suspend or hibernation function. Nothing is
shown on the display, even after resuming from
the suspend or hibernation mode.
In this case, the display will return after a tap
or click is made.
*
In [Start] - [Settings] - [Control Panel] - [Mouse] - [Tapping]
2
Operate after pressing the two buttons simulta-
neously.
When releasing the auto scroll function:
One tap on the work surface.
6
clicking
double-clicking
is added for [Drag
(To next page)