Product Features - Chicago Electric 95877 Owner's Manual & Safety Instructions

Hide thumbs

Table Of Contents

Table of Contents

When unpacking, check to make sure that the item is intact and undamaged. If any parts

are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this

manual as soon as possible.

Note: For additional information regarding the parts listed in the following pages, refer to the

Assembly Diagram near the end of this manual.

WARNING! Make sure the Close Quarter Drill is unplugged from its electrical outlet

before making any adjustments to the tool.

FORWARD/REVERSE SWITCH (33)

FIGURE A

Drill Chuck (3): The Close Quarter Drill is equipped with a 3/8" keyless Drill Chuck that

will accept drill bits (not included) with a 1/16" to 3/8" diameter shank. To install a drill bit,

press down on the Self-Locking Pin (11). Turn the Drill Chuck (3) counterclockwise until

the opening is large enough to accept the shank of a drill bit. Insert the drill bit and turn the

Drill Chuck clockwise until it is locked on the drill bit. Reverse this procedure to remove

the drill bit. (See Figure A.)

Forward/Reverse Switch (33): The Forward/Reverse Switch is used to select the desired

rotation of the Drill Chuck (3). For a clockwise rotation, move the Switch to the left. For a

counterclockwise rotation, move the Switch to the right. Use the Forward/Reverse Switch

only after the Close Quarter Drill has come to a complete stop. (See Figure A.)

Power Switch (32): To start the Close Quarter Drill, plug the Power Cord (44) into the

nearest 120 volt, grounded electrical outlet. Then squeeze the Power Switch. The Power

Switch features variable speeds, meaning the harder you squeeze the Switch the faster

the Drill Chuck will rotate (from 0 to 1500 RPM). To stop the tool, release pressure on the

Power Switch. The Power Switch also features a Power Switch Lock. For continuous

running of the tool, squeeze the Power Switch and then depress the Power Switch Lock.

To release the Power Switch Lock, briefly squeeze and let up on the Power Switch. (See

Figure A.)

Item 95877

UNPACKING