Quitting The System - Pioneer DJM-S9 Operating Instructions Manual

1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
MASTER LEVEL control
TRIM control
ISO (HI, MID, LOW) controls
FILTER control
Channel fader
INPUT SELECT switch
2 Click the play button on the user interface of Serato
DJ to play a track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the level of the sound output from the [MASTER 1] and
[MASTER 2] terminals to an appropriate level.
Monitoring sound with headphones
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
HEADPHONES MIX control
HEADPHONES LEVEL control
2 Slide the headphone [CUE] fader to the CH1 side.
3 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ software
manual.
! This unit's operating instructions can be downloaded from the
Pioneer DJ site. For details, see Acquiring the manual (p. 6 ).
! The Serato DJ software manual can be downloaded from "Serato.
com". For details, see Downloading the Serato DJ software manual
(p. 6 ).

Quitting the system

1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to
close it appears on the computer's screen. Click [Yes] to close.
2 Press the [POWER] switch on this unit's rear panel to
set this unit's power to standby.
3 Disconnect the USB cable from your computer.
16
En
Position
Turned fully counterclockwise
Turned fully counterclockwise
Center
Center
Moved forward
[USB-A DECK1] position
Position
Turned fully counterclockwise
Turned fully counterclockwise