Pioneer DJM-S9 Operating Instructions Manual page 7

Others
A USB 2.0 port is required to connect the computer
USB port
with this unit.
Display resolution Resolution of 1 280 x 720 or greater
An Internet connection is required for registering
Internet connection the "Serato.com" user account and downloading the
software.
Free HDD Space 5 GB
! For information on the latest system requirements, compatibility, and supported
operating systems, see "Software Info" of "DJM-S9" on the Pioneer DJ support
page below.
http://pioneerdj.com/support/
! Operation is not guaranteed on all computers, even if all the required operating
environment conditions indicated here are fulfilled.
! Depending on the computer's power-saving settings, etc., the CPU and hard
disk may not provide sufficient processing capabilities. For notebook comput-
ers in particular, make sure the computer is in the proper conditions to provide
constant high performance (for example by keeping the AC power connected)
when using Serato DJ.
! Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
! Operating System support assumes you are using the latest point release for
that version.
 Obtaining the Serato DJ software
1 Launch a web browser on the computer and access
the Serato DJ site below.
http://serato.com/dj/downloads
2 Log in to your "Serato.com" user account.
! If you have already registered a user account on "Serato.com",
proceed to step 4.
! If you have not completed registering your user account, do so
following the procedure below.
— Following the instructions on the screen, input your e-mail
address and the password you want to set, then select the
region in which you live.
— If you check [E-mail me Serato newsletters], newsletters
providing the latest information on Serato products will be
sent from Serato.
— Once user account registration is completed, you will receive
an e-mail at the e-mail address you have input. Check the
contents of the e-mail sent from "Serato.com".
! Be careful not to forget the e-mail address and password speci-
fied when you performed user registration. They will be required
for updating the software.
! The personal information input when registering a new user
account may be collected, processed and used based on the
privacy policy on the Serato website.
3 Click the link in the e-mail message sent from "Serato.
com".
Proceed to the Serato DJ download page. Proceed to step 5.
4 Log in.
Input the e-mail address and password you have registered to log in to
"Serato.com".
5 Download the Serato DJ software from the download
page.
About the installation procedure
After installing the driver software in Windows or Mac, install the Serato
DJ software.
 Installation Procedure (Windows)
Do not connect this unit and the computer until installation is
completed.
! Log on as the user which was set as the computer's administrator
before installing.
! If any other programs are running on the computer, quit them.
1 Double-click the downloaded driver software
(DJM_S9_x.xxx.exe).
2 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ software.
3 Unzip the downloaded Serato DJ software file.
4 Double-click the unzipped software file to launch the
installer.
5 Read the terms of the license agreement carefully,
and if you agree, select [I agree to the license terms and
conditions], then click [Install].
! If you do not agree to the contents of the license agreement, click
[Close] to cancel installation.
Installation begins.
The message of successful installation appears once installation is
completed.
6 Click [Close] to quit the Serato DJ installer.
 Installation procedure (Mac OS X)
Do not connect this unit and the computer until installation is
completed.
! If any other programs are running on the computer, quit them.
1 Double-click the downloaded driver software
(DJM-S9_M_X.X.X.dmg).
2 Proceed with installation according to the instructions
on the screen.
3 Unzip the downloaded Serato DJ software file.
7
En