Table of Contents
Advertisement
Power connector cable
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Remove the power connector cable:
1.
Disconnect the power connector cable (1) from the system board.
2.
Release the power connector cable from the retention clips (2) built into the base enclosure.
3.
Release the power connector (3) from the retention molding built into the base enclosure.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
32
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
787922-001
21).
Advertisement
Table of Contents
