Table of Contents
Advertisement
5
Removal and replacement procedures
CAUTION:
Accessing these parts can damage the computer or void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
There are as many as 54 screws that must be removed, replaced, and/or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Computer feet
NOTE:
The computer feet are included in the Rubber Kit, spare part number 822631-001.
Before replacing the computer feet, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
Remove the computer feet:
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3.
Remove the 4 rubber feet.
20
Chapter 5 Removal and replacement procedures
Components described in this chapter should only be accessed by an authorized service provider.
Advertisement
Table of Contents
