Table of Contents
Advertisement
Setup Settings
Press MENU to display the Menu screen.
2
Press ◀/▶ to select "Setup".
3
Press ▲/▼ to select the desired item, and press OK.
4
Press ▲/▼ to select the desired mode, and press OK.
5
Press END to exit.
Selected item
Programmes
First installation
Wide mode
EXT connections
EXT1
EXT2
EXT3 ( Y/C )
EXT3 ( CVBS )
Language
*
This item is visible only when "EXT1" or "EXT2" is selected for the "EXT connections" setting.
1
NOTE
EXT connections:
•
If no (colour) image is displayed, try to change to a different signal type.
•
Switching between AV input signals may be slow, depending on the settings in "Colour system". If you want to speed up signal switching,
select "Auto" in "Colour system" to the current reception colour system.
See page 12.
See page 8.
See page 13.
It is possible to manually adjust various settings for connections with external devices on the "EXT
connections" screen. Select the appropriate signal type and colour standard for the signals from the video
equipment connected to the EXT1, EXT2 or EXT3 terminal.
EXT1
Signal type*
EXT2
Colour system
EXT3 (Y/C)
EXT3 (CVBS)
The language for the on-screen display can be selected from English, Spanish, German, French, Italian,
Swedish, Dutch, Russian, Portuguese, Turkish, Greek, Finnish, and Polish.
Useful Features (continued)
Setup
Pro g rammes
First installation
Wide mode
EXT connections
Lan g ua g e
Choice/Description
Auto, CVBS, RGB, Y/C: To select the signal type of external equipment.
1
Auto, PAL, SECAM, NTSC4.43, NTSC3.58, PAL60
Advertisement
Table of Contents
