Connect The Adapter To Your Pc; Networking Cable Installation - LevelOne USB-0301 User Manual

3.2.1 Connect the adapter to your PC

1. Plug the USB-0301 adapter to your PC.
2. Windows will detect new hardware automatically and prompt you for
driver. For driver installation, please refer to the chapter "Software
Installation".

3.2.2 Networking cable installation

1. Connect the UTP Ethernet cable to the network port of the USB Adapter.
2. Plug the other end of the cable into a 10/100 Switch or Hub.
Note: You may select the networking cable according to the following
information:
10 BASE-T: Category 3, 4 or 5 UTP/STP
100 BASE-TX: Category 5 UTP/STP
6