Delete All Users - Anviz M5 Quick Manual

Operation Guide
Delete Card:
After delete one user, you can continue delete another
user or swipe Delete Card to save and exit.
Notice:
When you swipe card on M5, Red LED flashing
with long beeps means the card does not exist in
the device.

Delete All Users

Delete all uses fingerprints and cards, the
device parameter setting do not change.
2. Swipe
User Card
1. Swipe
Delete Card
Red LED
flashes
2. Swipe
Enroll Card
1. Swipe
Delete Card
Red LED flashes
4. Continue to delete
3. Swipe User
Card again
Red LED flashes Green LED lights up
fast and with 4 short beeps,
FingerPrint registration successed
sensor lights up
3. Swipe Enroll
Card again
Red LED flashes fast Green LED lights up
4 short beeps
Delete ASuccessed
5. Swipe Delete
Card to end
the process
4. Swipe Delete
Card to end
the process
9