ZyXEL Communications PLA4231 User Manual page 18

Chapter 3 The RESET/ENCRYPT Button
For example, you have already set up a powerline network in your home (A) which accesses a
printer (B). Now you want a separate powerline network connection from your laptop to your
printer (C).
Figure 4 One Existing Powerline Network
A
B
Click the RESET/ENCRYPT button on (A) for 5 to 8 seconds and then release it. This disconnects
1
(A) from (B).
Click the RESET/ENCRYPT button on (A) and (C) for 0.5 to 3 seconds and within two minutes of
2
each other.
Wait for about one minute while (A) and (C) connect.
3
Check the LEDs on both (A) and (C). When the power (
4
and the power (
Figure 5 Two Separate Powerline Networks
A
18
C
) light shines steadily, the devices are connected.
B
C
) and HomePlug ( ) lights stop blinking
PLA4231 User's Guide