Brother MFC-J6920DW Advanced User's Manual page 46

Chapter 7
g
Swipe up or down, or press a or b to
display Off(1in1),
2in1(Portrait),
2in1(Landscape), 2in1(ID)
4in1(Portrait),
4in1(Landscape), 1to2,
Poster(2x1), Poster(2x2) or
Poster(3x3).
Press the option you want to set.
1
For details about 2 in 1 (ID), see 2 in 1 ID Copy
(Page Layout) on page 42.
If you chose 2in1 or Poster(2x2)
with A3 or Ledger size paper, go to
step h to choose your
Layout Format.
If you choose another setting, go to
step i.
h
Press Layout Format.
Do one of the following:
 If you chose 2in1(Portrait) or
2in1(Landscape), press
Letterx2 i Ledgerx1,
Ledgerx2 i Ledgerx1,
A4x2 i A3x1, or A3x2 i A3x1.
 If you chose Poster(2x2), press
Letterx1 i Ledgerx4,
Ledgerx1 i Ledgerx4,
A4x1 i A3x4, or A3x1 i A3x4.
i
Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j
If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
If you are using the scanner glass, go
to step k.
k
After the machine has scanned the
page, press Yes to scan the next page.
40
l
Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps k and l for each page of
1
, the layout.
m
After all the pages have been scanned,
press No to finish.
NOTE
• Make sure the paper size is set to A4, A3,
Letter or Ledger.
• You can only make one colour copy at a
time.
• You can only make one Poster and 1 to 2
copy at a time.
• Poster copy is not available when using
transparencies.