About Network Function - Probe PID-P200HT Instruction Manual

About Network Function

This product is only compatible with current versions of the Microsoft Windows OS.

This product operates with Microsoft's Internet Explorer only.

You must have ActiveX controls enabled on your browser, found in the Options menu.

Some pop-up blockers may block legitimate configuration screens, please disable these

blockers when configuring the IP Dome Camera.
Some hardware manufacturers include a cable/DSL modem, router/firewall, and Ethernet

switch in one device.
If you have no available ports on your router (with integrated switch) you can purchase a

10/100 Ethernet switch to "expand" your Local Area Network
The crossover cable is not wired as a typical straight-through network cable. This cable (or

any crossover) should be used for initial setup of the IP Dome Camera via a PC/laptop.
Please temporarily disconnect any proxy servers associated with Internet Explorer while

configuring the IP Dome Camera.
 Modification and Development
The Linux-based operating system and flash memory file system enable advanced users and
application developers to customize the IP Dome Camera. An SDK developer kit is available for
users to interface ActiveX controls and other applications.
Attempts to modify the IP Dome Camera will void all warranties and will not be supported by
manufacturer or its seller. Further development tools and documentation for assistance may be
accessible in future releases. We strongly recommend that inexperienced users DO NOT modify
the firmware of IP Dome Camera.
The manufacturer or its seller will not be held accountable in a user's attempt to modify the IP
Dome Camera that renders the unit inoperable or otherwise.
This document is for Network firmware version 1.2.2a

ANTIVANDAL IP DOME CAMERA
INTRODUCTION
2
7/64