Precautions - Probe PID-P200HT Instruction Manual

Precautions

 Operating
Before using, make sure power supply and others are properly connected.

 While operating, if any abnormal condition or malfunction is observed, stop using the
camera immediately and then contact your local dealer.
 Handling
Do not disassemble or tamper with parts inside the camera.

Do not drop or subject the camera to shock and vibration as this can damage camera.

When attaching or removing the lens, handle with care to prevent moisture and dust from

entering the camera.
Do not point camera at any source of bright light. If the object contains very bright areas,

bright vertical or horizontal lines may appear on the screen. This is called "smear", a
phenomenon, which often occurs with solid-state pickups, and is not a malfunction.
 Installation and Storage
 Do not point the camera at the sun. This could damage the camera whether it is operating or
not.
Do not install the camera in areas of extreme temperature, which exceed the allowable

range.
Be sure the ambient temperature is below 104°F(40°C), for long-term continuous operation.

Avoid installing in humid or dusty places.

Avoid installing in places where radiation is present. This could damage CCD and other

components and cause malfunction.
Avoid installing in places where there are strong magnetic fields and electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.

 Never expose the camera to rain and water.
 Cleaning
Turn the power off and wipe off dirt with dry soft cloths. If it is extremely dirty, use furniture-

cleaning wipes. Do not use alcohols, petroleum distillates, liquid cleaners or sprays.
Owner's Record
Please record the model No. and the serial No. in the spaces provided below. Keep this manual for
future reference.
Model No.
ANTIVANDAL IP DOME CAMERA
Serial No.
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE
5/64