Direct Installation On The Ceiling - Probe PID-P200HT Instruction Manual

Direct Installation on the Ceiling

① As shown bellow, make a φ40 mm hole on the
ceiling panel to pass the cable and drill three φ3
mm hole at the position designated.
③ After adjusting Pan/Tilt/Twist angles, locate the
dome cover on the main body of camera.
⑤ Remove protection vinyl from the clear dome
cover.
ANTIVANDAL IP DOME CAMERA
INSTALLATION
② After passing the cables through the φ40 hole in
the ceiling panel, fix the main body to ceiling
with 3 x M4 screws provided.
④ Fix the dome cover by screwing 3 screws
provided.
3
12/64