Faq - Probe PID-P200HT Instruction Manual

 I can't connect!!
In the case of a connection failure.
Modem Reboot  Modem Reboot Finished  Router Reboot  Router Reboot Finished  IP Dome
Camera Reboot  IP Dome Camera Reboot Finish  Verify DDNS and IP Dome Camera connection,
if applicable.
 How do I choose a unique IP address that matches my network?
For your home or small office, ensure that all devices on your network are running. PING an IP
address that you plan to assign to the IP Dome Camera. If you receive a "Request timed out", then
you may use that IP address. To ensure the IP address that you will assign the IP Dome Camera
matches your network, review your "Current TCP/IP Settings" that you had recorded earlier. See
some examples below:

If your "IP Address" entry in "Current TCP/IP Settings" was 192.168.0.y, and your "Subnet
Mask" was 255.255.255.0 then use 192.168.0.x for your IP Dome Camera's IP Address ("x"
meaning any number between 2-254 that you wish, as long as it passes the "PING" test).

If your "IP Address" entry is not a 192.168.z.y address with a "Subnet Mask" of 255.255.255.0
then please contact our Support Center.

If your "IP Address" entry is not a 192.168.z.y address, please contact our Support Center.
 How do I open an MS-DOS or Command Prompt?

Windows 98 / ME Users

Windows 2000 / XP Users : Start  (All) Programs  Accessories  Command Prompt
 How do I "PING" an IP address?
① Open an MS-DOS (or Command) prompt
② At the prompt type - "ping xxx.xxx.xxx.xxx" (without the quotes and replace the "x"s with an
IP address)
③ Press Enter
 How do I enable or check ActiveX on my browser
Open Internet Explorer  Tools on the menu bar  Internet Options  Security Tab  Custom
Level  Scroll down and verify that you are prompted or have enabled ActiveX controls and plug-
ins to be downloaded and executed.  click OK  restart browser
ANTIVANDAL IP DOME CAMERA
: Start  Programs  Accessories  MS-DOS prompt
8

FAQ

59/64