Control Tool - Probe PID-P200HT Instruction Manual

Control Tool

 Com1
 PTZ Camera ID
 Baudrate, Data Bit
Stop Bit, Parity Bit
 Use Advanced
Communication
Setting
ANTIVANDAL IP DOME CAMERA
For PTZ devices only. Select the PTZ control protocol.
For PTZ Device Address Setup. 0 ~ 255 are available.
This setup is only for the non-standard protocols. Sometimes, PTZ protocol of some
manufacturers requires communication settings different from those of the
standard. To meet these special settings, click the check box of "Use Advanced
Communication Setting" bellow.
Used to adjust Baud Rate, Data Bit, Stop Bit, Parity Bit of the selected protocol. Do
not use if the select protocol is standard.
ADMIN TOOL
6
44/64