AT&T HS-8270 User Manual page 15

FEATURE SETUP
Delete an Announcement
1
If the announcement you want to delete is the currently selected
announcement (A, B, or AO) go to Step 2. If not, select the
announcement by following the instructions in "Select Your
Announcement" on page 11, then go to Step 2 below.
Press 7 (ANNC) on the base.
2
Press D while the announcement is playing. The system
3
beeps once when the announcement is deleted.
Set the Clock
Press * (CHANGE). The Message Window displays CH.
1
Press 8 (CLOCK). The system announces the current day setting.
2
To change the day setting, hold down 4 (REPEAT) or 6 (SKIP)
until the correct day is announced. Then release the button.
Press 8 (CLOCK). The system announces the current hour
3
setting. To change the hour setting, hold down 4 (REPEAT) or 6
(SKIP) until the correct hour is announced. Then release the
button.
Press 8 (CLOCK). The system announces the current minutes
4
setting. To change the minutes setting, hold down 4 (REPEAT) or
6 (SKIP) until the correct minutes are announced. Then release
the button.
Press 8 (CLOCK). The system announces the new day and time.
8
To check the current clock setting at any time, press 8 (CLOCK).
14