Windows-Based Program Control; Installing The Software - Extron electronics SW2 VGArs User Manual

im Vertrieb von
Remote Control, cont'd
www.camboard.de
SW VGArs / Ars Series Switchers • Remote Control
4-6
CAMBOARD Electronics

Windows-Based Program Control

Installing the software

Tel. 07131 911201
Fax 07131 911203
The Universal Switcher Control Program is compatible with
Windows 3.1/3.11, Windows 95/98, Windows NT, Windows
ME, and Windows 2000, and provides remote control of the
following:
• Input selection (including audio breakaway for models
with video and audio)
• Audio gain and attenuation adjustments (audio models)
• Front panel switch mode selection
Updates to this program can be downloaded from the Extron
Web site (http://www.extron.com).
The program is contained on a CD-Rom and must be installed
and run from the hard drive.
To install the software on the hard drive, install the CD in the
drive. If the program does not automatically install itself, run
launch.exe from the CD. Follow the screen instructions.
By default, the Windows installation creates a C:\UNIVSW
folder and places two icons (Universal Switcher Control
Program and Universal Switcher Help) into a folder named
"Extron Electronics", which it also creates.
ce-info@camboard.de
SW VGArs / Ars Series Switchers • Remote Control
4-7