AT&T EP5995 User Manual page 18

5.8 ghz cordless telephone/speakerphone answering system with caller id & call waiting
Hide thumbs Also See for EP5995:
Table of Contents

Advertisement

NOTE: The microphone
used when recording a ringer
is located at the bottom of the
handset. If recording a tune,
place the microphone about
twelve inches from the music
source. If recording a mes-
sage, speak clearly from about
twelve inches.
Keypad Tone
On
Off
SET
Telephone Setup
Handset sounds
Start recording the new ringer after the tone.
When finished recording, press the softkey
Press the softkey
PLAY
ringer. Then press the softkey
name of this recording using the table on page 30.
Enter up to ten alphanumeric characters for the
name of this recording (See table on page 30).
Press the softkey
SAVE
recording with the programmed name will then be
added to the list of ringer melodies.
More than one record ringer can be recorded
as long as there is recording time remaining. The
total recording time can be extended if some of
the preset musical ringers are deleted.
Keypad tone
The handset is preset to beep with the pressing
of each key. The keypad tones can be turned on
or off in this menu.
Press the
or
UP
DOWN
whether you want the keypad tone to be on or
off. Then press the softkey
NavKey
to confirm.
13
STOP
to listen to the recorded
to enter the
SAVE
to save this ringer. The
NavKey
or
to select
or the
SET
CENTER
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF