La Gard 3750-K Installation Instructions

Electronic entry device and deadbolt lock

See also: User Operating Instructions , Instruction and Installation Manual

The Quality System of LA GARD Inc. is ISO 9001 certified. In order to maintain this high quality standard and to ensure a problem

free application, please read this guide thoroughly before mounting the LPAUDIT.

SAFEGUARDS FOR MOUNTING

LA GARD recommends the following:

As soon as an electronic lock has been mounted, no more welding can be done on the safe.

Keep metal dust, filings, etc. away from the lock.

Never remove lock cover.

Never oil, grease, lubricate or paint the lock.

Keep cables away from sharp edges and moving parts.

Never carry Keypads or Locks by holding on to the cable.

Use ALKALINE batteries only. (LA GARD recommends Eveready™ or Duracell™)

Deadbolt Dimensional Drawing

3750-K Electronic Entry Device and Deadbolt Lock

INSTALLATION INSTRUCTIONS

Figure 2

12-273v2

1 3750-K Entry

[Comes with hardware pack that includes

mounting screws for entry, pin and spring and

bearing plate]

(

The pin and spring are for use with the Dual-Handed Swingbolt Lock

only. DO NOT use them with the Deadbolt or Springbolt style locks.)

2 3740-2/3040-DB/6040-DB Deadbolt Lock

[Comes with hardware pack that includes

mounting screws for lock]

Figure 1

LA GARD INC - A Member of The Kaba Group

Figure 3

Table of Contents

Do you have a question about the 3750-K and is the answer not in the manual?

Page 1 3750-K Electronic Entry Device and Deadbolt Lock INSTALLATION INSTRUCTIONS The Quality System of LA GARD Inc. is ISO 9001 certified. In order to maintain this high quality standard and to ensure a problem free application, please read this guide thoroughly before mounting the LPAUDIT.
Page 2 Gently pull on the cable to assure that there is no excess cable in the spindle hole that would rub on the metal door. Route the cable on the notch of the cable clamp as shown, see Figure 10 . © copyright 2006 12-273v2 LA GARD INC - A Member of The Kaba Group...
Page 3 Secure entry cable with tywrap, making sure that any extra cable is in a safe position and cannot be damaged by any moving parts or sharp edges, see Figure 13 . Figure 12 Figure 13 © copyright 2006 12-273v2 LA GARD INC - A Member of The Kaba Group...