Table of Contents
Advertisement
TO MATCH LIGHT THE GRILL
If the burner will not light after several attempts
then the burner can be match lit.
Match light extension rod is located on the inside
panel of the door.
If you've just attempted to light the burner
with the igniter, allow 5 minutes for any
accumulated gas to dissipate. Keep your face
and hands as far away from the grill as
possible.
1.
Insert a lit match attached to the
lighting rod through the cooking grids
to the burner (see next page).
2.
Press the control knob and rotate left
to the HI/Light setting, continue to
press the knob until the burner ignites.
Burner should light immediately.
3.
If the burner does not light in 4
seconds turn the knob off, wait 5
minutes and try again.
Grill Lighting Instructions
TO MATCH LIGHT THE SIDE BURNER
Hold a lit extended match near the side
burner ports, turn the control knob
counterclockwise to "IGNITE/HI". Move your
hand immediately once the burner is lit.
Rotate the control knob to the desired
setting.
continued
18
Hide quick links:
Advertisement
Table of Contents
