Numatic TTB 3226 Owner's Instruction Manual page 17

!
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED
Located in your waste water (top) tank is a full tank switch, this stops your machine from
working once the waste water reaches its maximum limit.
Sometimes the switch gets clogged and blocked, clean to ensure correct operation.
Remove white filter and rinse using clean water, and refit.
IMPORTANT:
Never use the machine without the recommended filter as it may cause damage to
the machine.
Remove debris basket filter and rinse using clean water, and refit.
IMPORTANT:
If the debris basket is allowed to become clogged, vacuum performance can deteriorate.
OFF PRIOR TO ANY MAINTENANCE.
After use, empty waste-water tank using emptying hose
and flush-out with clean water.
Next remove floor-tool vacuum hose and flush out
with clean water.
Next empty clean water tank, using emptying hose
and again flush out with clean water.
A
B
C
17
Machine Cleaning
B
Before removing
separator, first pull-off
connected hoses.
Whilst pressing in the
separator toggles, remove
hood and rinse using clean
water.
The hood also has a
sealing-rubber which should
be examined at every
clean-down.
!
A
C