Unfolding (Scooter to be in freewheel mode)
Unfolding the scooter is as shown below.
Ensure that you have sufficient space to unfold the scooter and that you
stand to the side of the scooter to prevent it opening towards your feet or
legs.
It is very important that the weight of the scooter is supported by the handle
during this procedure!
Support the weight of the scooter by the handle and pull the frame release
ring at the side of the scooter. While the ring is pulled out gently lower the
scooter to the ground allowing it to unfold.
Handle
Unclip and adjust the
tiller to the desired
position:-
Lift the seat upwards and backwards until it locks in position.
Ring
Pin
Red Lever
Pull to
unfold
Fix Gear
15
Handlebar