Hyundai WFC 1047 D10 Instruction Manual page 27

CHAPTER 8: MAINTENANCE AND CLEANING OF YOUR MACHINE
/PUMP FILTER
A filter system which avoids threads remaining from your laundries and tiny materials from
entering into the pump during water discharging operation carried out by your machine after
completing washing so prolonging the lifecycle of your pump is available. It is recommended
that you clean your pump filter once in 2 months. To clean pump filter:
• Depress the lug downwardly to uncover the pump section of the toe board and pull it towards
yourself and extract it.
• Before opening the filter cover, settle a vessel in front of the filter cover to prevent the water
remained in the machine from flowing on the ground.
• Loosen the filter cover in counter-clockwise and then empty water.
• Clean the foreign materials in the filter.
• Check whether the pump rotates with your hands.
• After cleaning the filter, fit the filter cover by rotating it in clockwise.
• Fit the pump section of the toe board.
• Remember that water will leak if you do not fit the filter cover properly.
• You can use the pump section of the toe board for discharging slight amount of water
remaining in the pump of your machine.
WARNING
As water in the pump may be hot, wait until it cools down.
ENG - 27
ENG