Hyundai WFC 1047 D10 Instruction Manual page 19

CHAPTER 6: OPERATING YOUR MACHINE
AUXILIARY FUNCTIONS
1-Revolution speed selection and auxiliary function of soaking
You can set the wringing revolution for your laundries via revolution speed setting button.
If you have skipped the wringing revolution you want to set, you can re-switch to the revolution
by keeping the revolution setting button pressed.
If you will not unload your laundries upon completion of the programme and you want them not
wrinkle in your machine, you can use the auxiliary function of soaking.
If this function is selected, your laundries will be soaked in the latest rinsing water. When your
machine soaks your laundries in the latest rinsing water, symbol
display.
If you want to take your laundries out, press on "Start / Pause" button.
Your machine will empty the water in it and finish the programme without wringing.
If you like to wring your laundries:
A) You can select wringing revolution by using the revolution speed setting button when your
machine is soaking your laundries in the latest rinsing water. If you want to take your
laundries out, press on "Start / Pause" button. Your machine will empty the water in it and
finish the programme after wringing your laundries through the wringing revolution you have
selected.
B) Switch the programme knob to 0. Select wringing programme on programme knob. You can
optionally reduce the revolution speed. You can start your machine by pressing on Start/
Pause button. Your machine will finish the programme after wringing your laundries
in the wringing revolution you have selected.
When you select a new programme, the maximum
wringing revolution speed of the programme you
have selected will be viewed on the display of
revolution speed.
You can gradually reduce the revolution speed
between cancel wringing (--) options through
the maximum wringing revolution
of the programme selected by pressing revolution
speed setting button.
In programmes where auxiliary function of soaking
is applicable, it may be activated by pressing
on revolution speed setting button once more
pursuant to stage of cancel wringing (--). You can
conceive that it is active when symbol
on electronic display.
ENG - 19
flashes
will blink on electronic
ENG