Table of Contents
Advertisement
31
Remove cover by snaping off from top or bot-
tom. Remove battery cover. Install 12V battery
into wall remote. Duracell MN21 / Eveready A23
/ GP 23A all 12V.
33
WALL MOUNT INSTALL
Install wall control unit to outlet box
using machine screws provided.
HAND HELD INSTALL
32
Place face plate over battery compartment and
buttons. Place remote over 2 pins on front
cover. Attach cover of remote by placing over 4
pins and snaping into place.
34
Attach front cover to wall control
with screws provided. Snap battery
cover in place.
Advertisement
Table of Contents
