Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 13 7000 Series Service Manual

Removing the display
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Remove the fan.
4 Remove the

Procedure

1 Disconnect the antenna cables from the wireless card.
2 Remove the screws that secure the display-cable bracket to the system
board.
3 Lift the display-cable bracket off the system board.
4 Using the pull tab disconnect the display cable from the system board.
computer. After working inside your
base cover.
heat sink.
After working inside your
63