Telephone operation
Handset locator
You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
HANDSET LOCATOR on the telephone base to
•
Press
start the paging tone on all handsets for 60 seconds.
To stop the paging tone:
•
Press
PHONE/
key (0-9, , or #) on the handset(s).
-OR-
•
Press
HANDSET LOCATOR on the telephone base.
-OR-
•
Put the handset in the telephone base or charger.
NOTES:
•
If you press
ringer of that handset is silenced but the paging tone continues on
the other handsets.
•
If the handset is accessing the answering system, on a call (intercom call or outside call),
or out of range, that handset does not beep when paged.
•
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
,
SPEAKER, or any dial pad
FLASH
OFF/
or MUTE/
CLEAR
on a handset, the
DELETE
23