Call Screening Setup; Number Of Rings - AT&T EL52200 User Manual

Answering system settings
Answering system setup
To delete your announcement:
Follow Steps 1 through 4 in To play the current announcement on page
1.
40 to play the announcement.
Press 3 during playback to delete your recorded announcement. The
2.
system announces,
"Announcement deleted."
If your announcement is deleted, calls are answered with the default
announcement, "Hello. Please leave a message after the tone."

Call screening setup

You can choose whether incoming messages are played through the speaker
on the telephone base while they are being recorded.
To change the settings:
Press MENU/
1.
2. Press or
DIR
/SELECT.
press
MENU
3. Press or
DIR
/SELECT.
MENU
4. Press /SELECT to select >CALL SCREENING.
MENU
5. Press or
DIR
6. Press /SELECT to confirm your setting. A confirmation tone sounds.
MENU
NOTE: For more details about the feature call screening, see Call screening on page 44.

Number of rings

You can set the answering system to answer an incoming call after two, four
or six rings. You can also select toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after four rings.
To set the number of rings:
1. Press MENU/
2. Press or
DIR
press /SELECT.
MENU
3. Press or
DIR
/SELECT.
MENU
4. Press or
DIR
/SELECT.
MENU
when in idle mode to enter the main menu.
SELECT
to scroll to >ANSWERING SYS, then
CID
to scroll to >ANS SYS SETUP. Press
CID
to choose between ON and OFF.
CID
when in idle mode to enter the main menu.
SELECT
to scroll to >ANSWERING SYS, then
CID
to scroll to >ANS SYS SETUP. Press
CID
to scroll to ># OF RINGS, then press
CID
41
CALL SCREENING
>ON
# OF RINGS
>4