Options While On Calls; Volume Control; Mute; Flash/Call Waiting - AT&T EL52200 User Manual

Telephone operation

Options while on calls

Volume control

While on a call, press
/VOLUME to decrease the listening volume.
CID
When the volume reaches the minimum or maximum
setting, you hear two beeps.
NOTE: The handset earpiece volume setting (1-5) and speakerphone volume setting (1-6)
are independent.

Mute

Use the mute function to turn off the microphone while on a call. You can
hear the caller, but the caller does not hear you.
To mute the call:
• Press MUTE/
shows MUTED for a few seconds and the MUTE icon
appears until you turn off mute.
To end mute:
• Press MUTE/
mute is off, MICROPHONE ON appears temporarily on
the handset screen.
-OR-
Mute is automatically canceled when you end the call.

Flash/call waiting

For more information on caller ID with call waiting, refer to About caller ID on
page 33. If you subscribe to call waiting service provided by your telephone
service provider, you hear a beep if someone calls you while you are already
on a call.
• Press
PHONE
and take the new call.
• Press
PHONE
forth between calls.
/VOLUME to increase or press
DIR
. When mute is on, the handset screen
DELETE
and then resume speaking. When
DELETE
/FLASH to put your current call on hold
/FLASH anytime to switch back and
20
MUTED
10:30 11/20
PM