Temporary Tone Dialing; Chain Dialing - AT&T EL52200 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have dial-pulse (rotary) dialing service only, you can temporarily switch
from dial-pulse to touch-tone dialing during a call.
1. During a call, press TONE . Buttons pressed after this
send touch-tone signals.
2. Use the dial pad keys to enter the number.
3. The telephone automatically returns to pulse dial mode
after you end the call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored in the
directory, caller ID history or redial list. Doing this can be useful if you need to
access numbers other than telephone numbers (such as bank account numbers
or access codes).
• To access the directory while on a call:
1. Press MENU/
2. Press
DIR
press
MENU
3. Press
DIR
(0 through 9) to find the desired entry (see To search
by name on page 29).
4. Press
MENU
the displayed number.
• To access the caller ID history while on a call:
1. Press MENU/
2. Press
DIR
/SELECT.
MENU
3. Press
DIR
necessary to view the dialing options, press #. See
To view the dialing options on page 36 for more
details.)
4. Press
MENU
the displayed number.
.
SELECT
to scroll to >DIRECTORY, then
or
CID
/SELECT.
or to scroll or press the dial pad keys
CID
/SELECT. The telephone automatically dials
.
SELECT
to scroll to >CALL LOG, then press
or
CID
or to scroll to the desired entry. (If
CID
/SELECT. The telephone automatically dials
21
PHONE 0:01:30
888-722-7702
10:30
11/20
PM
>DIRECTORY
CALL LOG
Charlie Johnson
888-883-2445
ROBERT BROWN
800-360-4121
8:30
11/20
PM