zika I-TIG 200AC/DC II User Manual page 5

● Never use the equipment to do other things but welding.
● Follow related regulations for the construction of the input-driven power source, choice of place,
usage of high-pressure gas, storage, configuration, safe-keeping of workpiece after welding and
disposal of waste, etc.
● Nonessentials do not enter the welding area.
● People using heart pacemaker is not allowed to get close to the welding machine or area without
doctor's permission. The magnetism created by energizing the welding machine can have a bad
effect to the pacemaker.
● Install, operation, check and maintain the equipment by profession personnel.
● Understanding the contents of the user manual for safety.
Please follow the rules below to avoid electric shock
● Keep away from any electric parts.
● Earth the machine and workpiece by professional personnel.
● Cut off the power before installation or checking, and restart 5 minutes later. The capacitance is
chargeable device. Please ensure it has no voltage before start again even if the power source is
cut off.
● Do not use wire with inadequate section surface or damage insulation sleeve or even exposed
conductor.
● Do ensure well isolation of wire connection.
● Never use the device when the enclosure is removed.
● Never use broken or wet insulation gloves.
● Use firenet when work at high position.
● Check and maintain regularly, don't use it until the broken parts are fixed well.
● Turn off the power when not in used.
● Follow the national or local related standard and regulations when using the AC welding machine at
narrow or high position.
Please follow the below notes to avoid fire and explode, etc.
● No combustible in welding area.
● Keep off combustible when welding.
Please follow the rules below to avoid heavy accidents.
5