Advertisement
After installation, please refer to operation, maintenance and troubleshooting
sections in this manual. If your fan is packaged with a light kit or
if you wish to install a separately purchased light kit, please refer
7
Standard wiring option
House
Black
* Attach blue wire
only if attaching
White
light kit with fan
Green
Secure with
twist-lock wire
connectors
(included)
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
vary in color and may not include ground wire.
After wiring is conplete, gently push wires into
junction box with wire nuts pointing upward.
Refer to point 3 of safety tips.
10
Combo-Blades feature two high quality finishes
on one blade. Select the one that best comple-
ments your decor, or change the style with just
a flip of the blade.
12
To gain access to the blade bracket
attachment holes remove the switch
housing cover by unscrewing the three
screws. Gently slide the cover off.
Installation
to the insert sheet titled: Light Kit Installation
8
Wiring option with wall speed control
Fan
Black
Blue *
White
Green(Downrod)
Green(Bracket)
For control of fan and optional light from
wall location, follow diagram above.
NOTE: A professional electrician is recom-
mended for this type of installation.
COMBO-BLADE
13
Shipping
stabilizer tab
Remove plastic shipping stabilizer tabs from
motor, if present. The screws, washers and
motor pads are pre-installed to the blade hold-
ers. Attach blade assembly to motor by tighten-
ing first screw one turn, then tighten second
screw securely. Then, go back and tighten first
screw securely.
Note:
Wall
Control
11
Attach blade brackets to blades using the blade
bracket screws and washers provided.
9
Raise the canopy up and align the two holes in
the canopy with the two holes in the hanger
bracket. Secure with two 5/32 x 1/2" screws
provided.
Fiber
washers
14
After attaching blade; reinstall the switch
housing using the three screws previously
removed.
Advertisement
