Using The Amp Shoulder Belt Clip - Evenflo Amp Owner's Manual

Using the Amp™ Shoulder Belt Clip
Styles may vary.
If the shoulder belt does not properly lay midway between
the child's shoulder and neck, attach and adjust the belt
clip for proper belt placement.
1.
Remove the shoulder belt clip harness
B
storage area beneath the booster
Note: Be sure to remove rubber band around the
strap and dispose of properly.
C
B
2.
C
Place booster on the vehicle seat and attach the
A
shoulder belt clip
3.
Pull the adjustment strap
with the child's shoulder and the shoulder belt
lays across the child's chest midway between his/her
shoulder and neck.
4.
To store the shoulder belt clip harness, fold it and
place it in the storage area
A
from the
C
.
A
D
to the shoulder belt .
E A
until belt clip
A
E
B
.
B
12
Using the Amp™ Shoulder Belt Clip
If the shoulder belt does not properly lay midway between
the child's shoulder and neck, attach and adjust the belt
clip for proper belt placement.
1.
Thread the looped end of the shoulder belt clip
strap
the booster
2.
Thread the shoulder belt clip
the end of the strap
is even
D
3.
D
Place booster
shoulder belt clip
4.
Pull the adjustment strap
with the child's shoulder and the vehicle shoulder
D
belt
his/her shoulder and neck.
A
through the anchor point on the back of
B
.
C
A
and pull until tight.
C
A
B
on the vehicle seat and attach the
C
to the vehicle shoulder belt
E
until belt clip
lays across the child's chest midway between
D
13
Styles may vary.
through the loop at
A
B
C
D
.
C
is even
C
D
E