Advertisement
19
Loosen 2 screws and remove 1 screw
from light plate and save screw.
22
Install 3 x 60 watt incandescent can-
delabra bulbs.
25
Attach cover of remote by placing
over buttons and snapping into
place.
20
Connect white wire from fan to white
wire from light fixture. Then plug
black wire from fan to black wire
from light fixture.
23
Attach glass by locating dimples in
light fixture with the groves in glass
and twisting clockwise till tight.
26
Install wall control unit to outlet box
using machine screws provided.
28
Fan speed
control
buttons
Fan on / off
To control fan speed select from High,
Medium or low speed buttons. To turn
the fan off press the Fan on / off button.
To dim lights press and hold button. To
turn off light press and quickly release
button. Press button marked REV to
reverse the rotation direction of the fan
blades
21
Install light fixture by twisting plate
with key hole slots into place.
Replace screw removed and tighten
the 3 screws securely.
24
Remove cover by snapping off from
top or bottom. Install 12V battery
into wall remote. Duracell
MN21/Eveready A23/GP 23A all 12V
27
Attach front cover to wall control
with screws provided.
Light dimmer
for lights
Fan
reverse
button
Advertisement
